Uses for Weather-Bos™ (i.e. roofs, sidings, fences)
Industries using
Weather-Bos™ (i.e. architects, contractors, wood product
manufacturers)
The advantages of Pre-
Staining your wood
How Much Weather-Bos™
do I Need?
Why does wood turn grey
and dull?
The science behind the
stains which occur on wood.
How to Become a
Weather-Bos™ Distributor/Manufacturer
MASONRY BOSS penetrates and bonds with all masonry surfaces. After MASONRY BOSS™ dries, it is nearly impossible to release this bond.
To see Weather-Bos™ in action click on the below Icon ...
WHY USE MASONRY BOSS™?
- Formulated to be environmentally safe.
- Will not discolor any masonry surface.
- Helps reduce dusting, powdering, efflorescence, spalling, and cracking.
- Application is a simple one-coat process.
- Prevents freeze-thaw damage due to excess water absorption.
- Locks water out but lets the material “breathe.”
- The natural ingredients in MASONRY BOSS™ are products of the environment. So when you apply MASONRY BOSS™, you’re just putting those naturally occurring products back into use!
A special Weather-Bos™ formula was used to treat a 75,000 square foot exterior wall on this concrete warehouse in Normal, Illinois.
This driveway in Provo, Utah was treated with Masonry Boss™. Note the darker wet areas where the Masonry Boss™ was not applied!
Cement and rock walls such as this one may be protected against mold, moss and general deterioration by just one coat of Masonry Boss™.
Formula 9 is a clear, odorless blend of natural ingredients utilizing the most advanced water hold-out technology and is recommended for all above-grade concrete and masonry surfaces
 |
|||
 |
|||
|
|||
|
Free Orderline 1-800-664-3978
|
|||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
